Disassembling and assembling bearing housing with intermediate shaft · No. Procedure Instructions

Disassembling and assembling bearing housing with intermediate shaft No. Procedure Instructions Checkingsealingsurfaces Check both sealing surfaces of bearing housingfor damage and cleanlinessbefore installationin the bearing housing. Grind off sharp edges if necessary. 2 Checkingflange bearing Check flange for ease of movementor roughness of intermediate shaft of bearing; replace intermediate shaft if necessary. 3 Fittinga-ring Carefullyfit O-ringin the grooveof the intermediate-shaft flange.Do not fit twisted.Greaselightly 4 Fitting chain for Put on chain between crankshaftdrive sprocket and intermediateshaft intermediate shaft drive sprocket. Fit guide rail and tensioningrail. After installation,turn intermediate shaft sprocket slightly by hand in clockwise direction and check whether there is sag in the upper chain area. Check chain installation if necessary. 5 Prepare intermediate To facilitate assembly,before installingthe complete shaft and crankshaft bearing housing unit in the crankcase half (cylinder for installation row 1-3), connect the crankshaftand intermediate shaft with an a-ring.