996 Carrera Group 1 – Part 1 Engine / PAGE 199
10. Removeplastic spacer sleeves, // ,--y-- · special too
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
10. Removeplastic spacer sleeves, // ,--y--
special tool 9613. ~;OJ
,~
;::::~~-""l--'---)~
0",
~"I U6
--'!L.1
'-'- 0-mM
Q'I JOO' "/
606_97
'@"
12. Unscrewplug for piston pin assemblybore.
Use a 12 mm hexagon socket wrench insert.
491_96
11. Fit belt pulley. Screw in fastening screw
by hand.
Cylinder bank 4 -6 faces upward. -I(
Bore U6 on the belt pulley must be aligned
with the fixing bore on the crankcase.
Position or fix with fixing pin (short) of
special tool 9595.
Note
Fixing of the belt pulley is absolutelynecessary
in order to ensure precise fitting of the pistons. (0\-
66_98
"
This is a source reference. Confirm exact model applicability in the original material.