996 Carrera Group 1 – Part 1 Engine / PAGE 210
37. Fit oil pump with coolant guide housing. · Assembly instructions: Group 17,
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Crankshaft, pistons
37. Fit oil pump with coolant guide housing.
Assembly instructions: Group 17,
Page 17 -5.
/ /
"'- --
51
fjB
442_97
597_97
38. Fit intermediate shaft flange
Grease sealing ring in area of intermediate
shaft flange. Grease receiver bore in
area of the crankcase. Carefully press in
the intermediateflange.
Screw in new micro-encapsulated
hexagon-headbolts M6 x 20 (3 ea.).
Tighteningtorque: 10 Nm (7.5 ftlb.).
Tighten locknut with the socket wrench,
special tool 9110. For this purpose,
hold with a slotted screwdriver 7.9 x 1.1
at the slotted threaded pin.
Tighteningtorque: 11 Nm (8 ftlb.).
13 -67131019 Removing and installing pistons
This is a source reference. Confirm exact model applicability in the original material.