996 Carrera Group 1 – Part 1 Engine / PAGE 215
Engine -Crankshaft, pistons 911 Carrera (996) · Removing drive belt -GT3
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Engine -Crankshaft, pistons 911 Carrera (996)
Removing drive belt -GT3
No. Procedure Instructions
Removeair cleaner assembly
;( Removeair cleaner assemblycompletely. Undo hexagon-headbolt M6 x 34. Undo the hose clamp
on the throttle body. Pull off plug from hot film mass
air flow sensor and remove air cleaner assembly. \~~~~ii~~ '
( \\\\:E~~~~~~~!~~~ii~~~~~~~~~~~f ~ -:---,/
188_8_99
2 Loosen servo pump wheel
Mark belt travel direction with a coloured pen. Undo the
three hexagon-headbolts on the servo pump by approx.
one half turn.
--===/ '
188_b_99
3 Relievedrive belt
Relievethe belt tension. To do this, turn the tensioning
roller clockwise and simultaneouslyremove the belt
from the drive pulleys.
13 -72 137819 Removing and installing drive belt (engine installed) -GT3~--~
This is a source reference. Confirm exact model applicability in the original material.