996 Carrera Group 1 – Part 1 Engine / PAGE 220
No. Procedure Instructions · 4 Tighten the fastening screws on
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Crankshaft, pistons
No. Procedure Instructions
4 Tighten the fastening screws on the servo pump
Tighten the fastening screws of the servo pump drive
wheel. The three screws are tightened to 23 Nm (17 ftlb.J,
~:~==~/ 189_d_99
5 Install air cleaner assembly
Install air cleaner assemblycompletely. Attach connector
onto mass air flow meter. Tighten the hose clamp on the
throttle body. Tighten hexagon-headbolt M6 x 34.
13 -77
This is a source reference. Confirm exact model applicability in the original material.