Maintenance 911 Carrera (996) · 2. Mark belt travel direction with a coloured pen. 4. Visuallyinspect the

Maintenance 911 Carrera (996) 2. Mark belt travel direction with a coloured pen. 4. Visuallyinspect the condition of the belt and Undo the three hexagon-headbolts on the replace it if necessary. pulley of the servo pump by approx. one half turn. Installation 1. Fit the pulley of the servo pump with the drive belt and tighten the three hexagon-headbolts. \ )i:!; Tightenthe drive belt in the following order: ~l 1. Crankshaftpulley (1) 2. Power steering pump drive pulley (2) 3. Deflection roller 1 (3) '- 4. Air-conditioningcompressor drive pulley (4) 5. Coolantpump drive pulley (5) 6. Alternator drive pulley (6) 7. Tensioningroller (7) 8. Deflectionroller (8) Then turn the tensioning roller (7) in clockwise 060_99 direction and simultaneouslyfit the drive belt on the deflection roller 2 (8). 3. Relievethe belt tension. To do this, turn the tensioning roller (7) clockwise and simultaneouslyremove the belt from the drive pulleys. Remove pulley of the servo pump and take out drive belt. 120_99 165_99 03 -38 03 20 00 Maintenance -GT3 9960327 Printed in Germany -25, 1999 /111