Radialsealing ring 1 · 2 Bearingsleeve,bearing8 1 Replace

Note: Radialsealing ring 1 2 Bearingsleeve,bearing8 1 Replace 3 Roundseal 1 Replace, do not fit twisted 4 Radialsealing ring 1 Replace 5 Snap ring 1 Carry out insertion test 6 Spacer ring Warm on heating plate, push on up to stop 7 Timing gear 1 Check toothing for wear, Note reference number, remove if necessary paired with intermediate shaft, only install together, warm on heat- ing plate, push on up to stop. The collar of the timing gear must point to bearing 7. 8 Woodruff key 1 9 Connectingrod nut 12 Tightening torque M9 x 1.25 Initial tightening: 30 Nm (22 ftlb.) Final tightening: 1 x 900 turn 10 Washer 12 11 Connectingrod 6 Note installationposition and weight. Note classifi- cation or matching num- ber to connecting-rod bearing cap 12 Connectingrod bearing 6 Replace shell half 13 Connecting-rod bearing cap 6 Note matching number to connectingrod 13 -203