996 Carrera Group 1 – Part 1 Engine / PAGE 231
6. Mountconnecting rods on the crankshaft. The Tightening torque: · thread of the con-rod bolts must be greased In
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine, crankshaft, pistons
6. Mountconnecting rods on the crankshaft. The Tightening torque:
thread of the con-rod bolts must be greased Initial tightening 30 Nm (22 ftlb.
Final tightening 1 x 90 0 turn without fail.
Use special grease Part No. 000.043.300.12.
The matching numbers of the con-rodsand
the con-rod bearing caps must all point to the
same side.
'~
~ ill/I.'~
278_99
7. Tighten con-rod nuts. When tightening, the
con-rod bolt nust be protected against turning
at the same time by a second person using a
feeler gauge.
326_99
134837 13 -207
This is a source reference. Confirm exact model applicability in the original material.