996 Carrera Group 1 – Part 2 Engine / PAGE 34
5. Fit cylinder head. · The cylinder heads differ in the area
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cylinder head, valve drive
5. Fit cylinder head.
The cylinder heads differ in the area
of the chain tensioners and are therefore
marked on the front with 1 -3 or 4 -6
to prevent mix-ups.
Cylinder bank 1 -3
493_97
6. Fit guide for valve tappets. Tighten pan-head
screws (M6 x 35) from the inside to the
..outside. Tightening torque: 10 Nm (7.5 ftfb.)
567_96
5.1 Tightening torques and tightening sequence:
refer to Page 15 -8a.
5.2 Fit shield. Tightening torque of
the hexagon-head bolt M6 x 16:
10 Nm (7.5 ftlb.)
Note
The shield is fitted only on cylinder head 1 -3. 659_97
7. Lightlyoil the valvetappetand fit it in
the guide.
15 05 22 Installing camshafts 15 -29
Printed in Germany -10, 1998 9961527
This is a source reference. Confirm exact model applicability in the original material.