996 Carrera Group 1 – Part 2 Engine / PAGE 72
3.2 Lift inlet camshaft and insert tensioning · element from the front.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cylinder head, valve drive 15
3.2 Lift inlet camshaft and insert tensioning
element from the front.
\
\~~I-/11
~ \UL':~
635_97
4. Completelypreassembled and ready for
installation.Do not remove the tension screw,
491_97 special tool 9632, until the bearing saddles
and the chain tensioner have been fastened
3.3 Fit chain; when doing so, observe clearance on the cylinder head. If allocation is correct,
between the gear wheels and the lower slide the groove or lug of the camshaft position
rail. sensor housingface upward.
h ~
,@
49o_97 246_97
15 05 33 Completing camshafts 15 -73
Printed in Germany -10, 1998 9961571
This is a source reference. Confirm exact model applicability in the original material.