996 Carrera Group 1 – Part 2 Engine / PAGE 82
Installation · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Installation
No. Procedure Instructions
5 Pull off oil protectiontube Fit washer (approx. 4D mm 0) and hexagon nut (MID) on
the threaded rod. Press oil protection tube outward using
two mounting levers, alwaysusing a suitable wooden
support.
6 Fit oil protection tube Fit new sealing rings and coat with tyre mounting paste.
Using the pressure piece (special tool 96051/1) and hand
pressure piece (special tool 9604), manually press in
the oil protection tube as far as it will go.
Fit spark plug Fit spark plug with the prescribed spark-plug wrench.
Tighening torque 25 :t 5 Nm (19 :t 3.5 ftlb.)
Fit ignitioncoil Tighteningtorque 10 Nm (7.5 ftlb.)
15 -86 15 46 19 Removing and installing oil protection tubes -Engine installed
9861583 Printed in Germany -10. 1998
This is a source reference. Confirm exact model applicability in the original material.