996 Carrera Group 1 – Part 2 Engine / PAGE 88
15 59 27 Removing valve tappets of cylinder bank 1 .3 · 1. Move camshafts of cylinder bank 1 -3 to 2. Pull off clo
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cylinder head, valve drive
15 59 27 Removing valve tappets of cylinder bank 1 .3
1. Move camshafts of cylinder bank 1 -3 to 2. Pull off closure caps of cylinder head 1 -3
basic position. Turn crankshaftclockwise until -flywheel side. Turn shop-madeextractor
the bore 1 aT (top dead centre) in the belt into centre of piercing point of closure cap
pulley is aligned with the fixing bore on the and pull off the cap.
crankcase. Position or fix with fixing pin (short)
of special tool 9595 or 9595/1.
71O_97 -
166_98
'--J ,,;
/' '1"'-. /
/
~ \~ I~
188_98 ~/
155_98 3. Check basic camshaft adjustment of cylinder
bank 1 -3 .Ensure that the groove in the
camshaftfaces outward toward the cylinder
head cover.
15 59 27 Removing valve tappets of cylinder bank 1 -3 15 -95
Printed in Germany -10, 1998 9961595
1=111-:='1
This is a source reference. Confirm exact model applicability in the original material.