15 59 24 Installing valve tappets of cylinder bank 4 -6 · 1. Check guide for damage. Refer to: Checking 6. Check dow

911 Carrera (996) Engine -Cylinder head, valve drive 15 59 24 Installing valve tappets of cylinder bank 4 -6 1. Check guide for damage. Refer to: Checking 6. Check dowel sleeves (4 ea.) of the bearing guide for valve tappet, ServoNo. 15 5902. saddles to ensure that they are properly seated in the cylinder head. Oil bearing 2. Fit guide. Tighten pan-headscrews (M6 x 35) surface. Fit bearing saddles in the correct from the inside to the outside. Tightening position and tighten evenly. torque: 10 Nm (7.5 ftlb.) Tightening torque 10 Nm (7.5 ftlb.) 3. Lightly oil the valve tappet and fit it in the guide. 4. Lay the complete unit, camshafts with chain and tensioning element, in the cylinder head. The groove or tab of the camshaft position sensor cover must face inward in installed position. If the allocation should be uncertain, e.g. chain jumped over, reallocationis necessary. Refer to: Completing camshafts, ServoNo. 15 05 33. 401_1_96 4 EA == BearingBearing saddlesaddle forfor inletexhaustcamshaftcamshaft ==--1 7. Fit tensioning element(VarioCam).Tighten 3 M6 x 95 pan-headscrews. " Tighteningtorque 10 Nm (7.5 ftlb.) , ~ @ g ~ g @ 243_97 5. Fastenspecialtool, holding-downdevice 9611, with auxiliaryscrewsM6 x 45. 15 59 24 Installing valve tappets of cylinder bank 4 -6 15-111 Printed in Germany -10, 1998 99615111 !~15