Engine -Cylinder head, valve drive 911 Carrera (996) · Checking camshafts of cylinder bank 1 .3

Engine -Cylinder head, valve drive 911 Carrera (996) Checking camshafts of cylinder bank 1 .3 1. Move camshafts of cylinder bank 1 -3 to 2. Check basic camshaft adjustmentof cylinder basic position. Turn crankshaft clockwise until bank 1 -3 .Ensure that the groove in the the bore 1 OT (top dead centre) in the belt camshaft faces outward toward the cylinder pulley is aligned with the fixing bore on the head cover. crankcase. Position or fix with fixing pin (short) of special tool 9595 or 9595/1. 215_98 View from the flywheelside 166_98 If the position of the camshafts is incorrect or the groove in the inlet camshaft does not face outward, remove fixing pin of belt pulleyand turn crankshafta further 3600 clockwise. Then position or fix the fixing pin in the bore (1 aT) and the fixing bore in the crankcase again. 3. Check the position of the groove again. 155_98 15 -124 15 05 02 Checking camshafts (timing) -Engine installed 99615121 Printed in Gennany -10, 1998