Installing camshaft housing -GT3 · 8. Install camshafts.

911 Carrera (996) Engine, cylinder head, valve drive Installing camshaft housing -GT3 8. Install camshafts. I;- ~ Apply a thin coat of Optimol Optipit (00004320417) grease on the camshaft bearing surfaces. Insert the camshafts into the camshaft housing. Designation of the camshaft cylinder bank 1-3 fQj Inlet: 214.99 Exhaust:212.95 Designation of the camshaft cylinder bank 4-6 15700001 Inlet: 214.98 Exhaust:212.95 10. Insertcamshafts. With cylinder bank 1-3, insert the camshafts in such a way that the cams of the first cylinder point inwardsand diagonallyinwards Designationposition 393_99 9. Set engine to top dead centre. Using a universalholder, mount a dial gauge on each of the cylinder heads in such a way View of a camshaft, cyJ.1 15700018 that it is possible to measure from the gauge on the piston crown from cylinder 1 or 4. Turn the engine in running direction until no further deflection takes place on the dial gauge or until the first and fourth cylinders are at top dead centre. 15 03 23 Installing camshaft housing -GT3 15-155 Printed in Germany -39, 2000 99615149