Installing camshaft housing GT3 · Mountthe inlet camshaft adjuster.

911 Carrera (996) Engine, cylinder head, valve drive Installing camshaft housing GT3 Mountthe inlet camshaft adjuster. Place the inlet camshaft adjuster on the inlet camshaft and at the same time place the timing chain on the inlet camshaft adjuster. 4, Place the fastening screw in position, but do not tighten it. Make sure that the timing 0 chain is fed correctly in the guide rail. (/ 266_99 15. Mountthe guide rail between the camshaft wheels. Tighten the three hexagon-headbolts to 13 Nm (9.5 ftlb.). 412_99 14. Mountthe chain sprocket of the exhaust camshaft. Clean the assembly surfaces of the exhaust camshaft and of the chain sprocket and remove all oil and grease. Place the chain sprocket for the exhaust camshaft into the timing chain and place them together onto the exhaustcamshaft. Mountthe driver for the oil pump and place the fastening screw 211_99 in position, but do not tighten it. The inscription "left" must be legible on cylinder bank 1-3 and the inscription "right" on cylinder bank 4-6. 15 03 23 Installing camshaft housing -GT3 15-157 Printed in Germany -39, 2000 99615149 3.