996 Carrera Group 1 – Part 2 Engine / PAGE 175
Assembly instructions · Sealing the oil pan Application of silicone bead
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Assembly instructions
Sealing the oil pan Application of silicone bead
Only "Drei Bond" silicone type 1209, part 1. At the processing nozzle, cut off the first
No. 000.043.203.73 (30-gram tube) should be metering step.
used as the surface seal. After application of
surface seal (silicone bead), screw together 2. Apply a uniform bead approximately 1.5 mm
within five minutes. wide to the cleaned sealing surface of the oil
pan.
486_96
3. Place the oil pan in the correct position
carefullyso that the sealing bead is not
damaged. Screw two studs or centring
pins into the corners of the crankcase
halves as centring aids.
641_96
17-4 175319 Removing and installing air/oil separator
This is a source reference. Confirm exact model applicability in the original material.