996 Carrera Group 1 – Part 2 Engine / PAGE 179
No. Designation Qty. Removal Installation · 15 Hexagorl-headbolt 8
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Note:
No. Designation Qty. Removal Installation
15 Hexagorl-headbolt 8
M6 x 25
16 Oil-pumpcover 1
17 Sealing ring 1 Replace
18 Dowel sleeve 8.2 x 7 2 Fit in oil-pump cover
19 Pan-headscrew M6 x 20 4 Tightening torque 10 Nm
(7.5 ftlb.)
20 Neck
21 Gasket 1
22 Temperature sensor with 1 Tighteningtorque
captive sealing ring 25 :t 5 Nm (19 :t 3.5 ftlb.)
23 Sealing ring 1 Replacementsealing ring
for item 22 (fit if sealing
ring of item 22 has been
damaged)
24 Hexagon-headbolt 2 Tightening torque 10 Nm
M6 x 20 (7.5 ftlb.)
25 Cap 1
26 Gasket 1 Replace
27 Stud 4 Screw micro-encapsu-
MI0 x 105 lated end into the crank-
case.
Tighteningtorque:
15 + 3 Nm (11.0 + 2.0
ftlb.)
17 -8 17 20 19 Removing and installing oil pump with coolant guide housing
This is a source reference. Confirm exact model applicability in the original material.