Engine -Cylinder head, valve drive 911 Carrera (996) · 8. Fit exhaustmanifold with new gasket. Fit Oil

Engine -Cylinder head, valve drive 911 Carrera (996) 8. Fit exhaustmanifold with new gasket. Fit Oil extraction pump of cylinders 4 -6 the gasket in the correct position between (pulley side) the exhaustmanifold and cylinder head. The bent-upsheetmetal tab must point Removal upward toward the cylinder head. Tightening 1. Unscrewfour fastening screws and remove torque for hexagon-headbolts 25 Nm the oil extraction pump. (18.5 ftlb.) 9. Fit right rear wheel. Installation Tighteningtorque 130 Nm (96 ftlb.). 1. Lightly grease the new sealing ring and lay it in the oil extraction pump. 2. Align oil extraction pump driver and fit oil extraction pump in the correct position. The arrow for the direction of rotation or the marking "4 -6" must face the crankcase, / / rttl 1/ ( 0 - L\ /" r ../ IL- 223_98 3. Tighten micro-encapsulatedhexagon socket head bolts. Tighteningtorque 10 Nm (7.5 ftlb.)