Engine -Lubrication 911 Carrera (996) · Installation

Engine -Lubrication 911 Carrera (996) Installation 1. Cleanoil pan sealing surface and crankcase 3. Apply silicone bead. sealing surface thoroughly. At the processing nozzle, cut off the first metering step. Apply a uniform bead Note approximately 1.5 mm wide on the If the oil pan is cleaned with the partition box cleaned sealing surface of the oil pan. fitted, remove the two rubber flaps on the partition box before cleaning. /6\ 589_97 2. Seal the oil pan sealing surface. When sealing the sealing surface on the oil pan, use only the sealant Drei Bond Silikon -type 1209. Note 641_96 After the sealanthas been applied, the crankcase must be joined with 4. Put on the oil pan carefully in the correct the oil pan within 5 minutes. position, in order to prevent damage to the sealing bead. Screw two studs or centring pins into the corners of the crankcase halves as centring aids. 5. Fit oil drain plug with new sealing ring. Tighteningtorque: 50 Nm (37 ftlb.).