996 Carrera Group 1 – Part 2 Engine / PAGE 209
Disassembling oil extraction pump -GT3 · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Disassembling oil extraction pump -GT3
No. Procedure Instructions
1 Undo assembly screws
//
Undo the four assembly screws crosswise and remove.
2 Take off oil pump lid
If the oil pump lid is stuck, lever off carefullywith a plastic
wedge. The housing must not be damaged during this
procedure.
199_b_99
3 Remove input shaft
/
I Take feather key out of the input shaft and lift input shaft
out of the oil pump lid.
\\
"
199_c_99
17 -42 171937~~~'"
This is a source reference. Confirm exact model applicability in the original material.