996 Carrera Group 1 – Part 2 Engine / PAGE 218
Installing oil extraction pump -GT3 · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Installing oil extraction pump -GT3
No. Procedure Instructions
Replace seals
The three seals shown must alwaysbe replaced. Coat the
large O-ringwith acid-free grease to facilitate assembly of
the oil extraction pump.
202_&_99
2 Put on oil extraction pump
Put on oil extraction pump. When doing this, make sure
that the driver and the input shaft of the oil extraction
pump are correctly aligned. Tighten the three fastening
screws to 13 Nm (10 ftlb.J.
2O2_b_~
3 Tighten return line
Tighten return line on the oil extraction pump. Make sure
to counter with a wrench when doing this.
202_c_~
This is a source reference. Confirm exact model applicability in the original material.