996 Carrera Group 1 – Part 2 Engine / PAGE 231
Installing oil container -GT3 · No. Procedure Instructions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Installing oil container -GT3
No. Procedure Instructions
4 Pushingon oil level sender plug and tightening the oil line.
Push on the oil level sender connectingcable again. Then
tighten the oil return line from the cylinderhead. Make sure
to counter with a wrench at the oil containerwhen doing
this.
5 Tighteningoil return line and vent line.
Tighten oil return line on the oil container. Make sure to
counter with a wrench at the oil container when doing this.
Push on vent hose again and fit the spring band clamp.
17 52 19 Removing and installing oil container -GT3
This is a source reference. Confirm exact model applicability in the original material.