996 Carrera Group 1 – Part 2 Engine / PAGE 236
Removing bracket for oil cooler -GT3 · No. Designation Qty. Removal Installation
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Removing bracket for oil cooler -GT3
Note:
No. Designation Qty. Removal Installation
1 23-35/9 hose clamp
2 Vent hose
3 40-60/9 hoseclamp
4 M 6x16 hexagon-headbolt 4 Tighteningtorque 9.7 Nm
(7.0 ftlb.)
5 Oil cooler
6 26x3 a-ring 4
7 M 6x25 hexagon-headbolt 2
8 M 8x35 hexagon-headbolt 2
9 Holder 1
10 M 6x25 hexagon-headbolt 3
11 Housingwith filter element 1
12 Seal Replace
13 Banjo bolt 1 Tighteningtorque 30 Nm
(22 ftlb.)
14 Sealing ring 2 Replace
15 Oil line 1
16 Temperaturesensor 1 Tighteningtorque 25 Nm
(19 ftlb.)
17 Sealingring 1 Replace
18 M 6x12 hexagon-headbolt 1
19 23-35/9 hose clamp
20 M 6x25 hexagon-headbolt 4 Tighteningtorque9.7 Nm
(7.0 ftlb.)
21 Bracket 1 Coat seal facing
crankcase with Drei Bond
type 1209
17 -72 176721 Removing bracket for oil cooler -GT3
This is a source reference. Confirm exact model applicability in the original material.