996 Carrera Group 1 – Part 2 Engine / PAGE 294
No. Procedure Instructions · 4 Removecoolant regulator housing
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cooling
No. Procedure Instructions
4 Removecoolant regulator housing
Undo the three fastening screws on the coolant regulator
housing. Removethe coolant regulator housing. Do not
use the seal again.
5 Removecoolantregulator
Remove coolant regulator with special tool 9627. Insert
assembly aid between the sheetmetal edges as shown.
Push the assembly aid against the spring force until the
retaining bracket is released. Then turn coolant regulator
by approx. 900 and take coolant regulator out of the
housing.
348_9_99
195819 19 -35
This is a source reference. Confirm exact model applicability in the original material.