996 Carrera Group 1 – Part 2 Engine / PAGE 347
25. Postionthe right fastening screw -C-. Positionthe left genera- ~ / · tor fastening
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cooling
25. Postionthe right fastening screw -C-. Positionthe left genera- ~ /
tor fastening screw -A- in the direction of travel. Install deflec-
tion roller -8- underthe generator andtighten. Tightenthe right
and left tightening screw of the generator.
Tightening torque for all three screws: 46 Nm (34 ftlb.
0
I~
26. Mountthe belt pulleyof the hydraulicpumpwiththe fitted drive ...
belt of the hydraulicpump. Screwin threehexagon-headbolts
by hand.
The hexagon-headscrews can be fastenedafter tensioningthe drive
belt.
27. Fit drive belt. To do this, turn the tensioninglever of the ten-
sioning roller clockwise and hold. At the sametime, place the
drive belt onto the drive wheels of the air-conditioningcompres-
sor, the idler pulleyand the generator. Now slowlyreleasethe
tensioninglever.
~ 1\ /~;::;;7 '
196219 Removing and installing coolant hoses -GT3 19-73 page 19IJ...~
This is a source reference. Confirm exact model applicability in the original material.