4 Notes on repair instructions -GT3 · General The stabilizer block is also adjus

911 Carrera (996) Running gear 4 Notes on repair instructions -GT3 General The stabilizer block is also adjusted for replacement dampers.The 911 Carrera (996), and also the 911 GT3, is the basic model covered by the repair, assembly and adjustmentoperations in the "911 Carrera (996)" Technical Manual. Onlythe GT3-specificprocedures which deviate from this are additionallydescribed in this Technical Manual. 2 Tightening torques 1 3 Tighteningtorques for the 911 Carrera (996) 4 and 911 GT3 are almost the same.Tighteningtorques that deviate or are additional ~ are contained in the tables of the appropriate Repair Group for the 911 Carrera (996). Front axle 76_99 Adjustment work on the front and rear 1 -Lock nut axle spring struts 2 -Height adjusting nut 3 -Lock nut 4 -Stabilizer blockThe front and rear axle spring strut has a thread and a height adjusting nut No.2 for height adjustment. The height adjusting nut No.2 is secured against turning by the lock nut No.1. The stabilizer block -No.4 -(mounting saddle for the stabilizer mount) is also fitted on the thread. The stabilizer block can be vertically adjusted and it is provided with a lock nut No.3. 3 This adjustment possibility is only useful for ,1 racing. It can be used to ensure that enough -t clearance is availablefor the stabilizer mount even for deviating vehicle heights (onlyfor racing) and also that the stabilizer mount can Rear axle 77_99 be fitted free of tension. 1 -Lock nut The stabilizer block No.4 does not need to 2 -Height adjusting nut be adjusted for the vehicle height prescribed 3 -Lock nut 4 -Stabilizer block for street use. 4 Notes on repair instructions -GT3 4-11 Printed in Germany -25, 1999 9964_9