Front wheel suspension, drive shafts 911 Carrera (996) · Installation 4. Check

Front wheel suspension, drive shafts 911 Carrera (996) Installation 4. Check and adjust steering-geometryvalues at the front axle.1. Install in reverse order. Before installing, give the parts a visual check. Replace Note brake caliper fastening screws. If assemblywork was performed or parts 2. Do not grease screwed connections in replaced that affect the vehicle height, a Dacromet finish -aluminium colour. complete wheel alignment is necessary. Use correct tightening torques. 3. Insert spring strut into vehicle. Note the installed position of the spring strut mount. The arrow markings must point to the outer side of the vehicle (A). The shock-absorber piston rod is thereby shifted outwards. Use new fastening nuts. Before tightening the fastening nuts, adjust spring strut mount in accordance with the applied marking (position of the three collar nuts). Use correct tightening torque. A = Outer side B = Inner side 40-6 40 85 19 Removing and installing front spring strut 996401 Printed in Germany -25, 1999