No. Designation Qty. Removal Installation · Fastening nut 1 If necessary

911 Carrera (996) Front wheel suspension, drive shafts Note: No. Designation Qty. Removal Installation Fastening nut 1 If necessary,pre-tension Use Inewfastening nut. M 12x 1.5 with the spring clamp Grease thread of the before looseningthe piston rod with Optimoly fastening nut. This depends HT (copper paste). on the adjustment Tighten to 80 Nm (pre-tension)of the coil (59 ftlb,), spring. Support at the piston rod with a 7-mm Allen key when looseningthe nut. 2 Assemble spring 1 Removecomplete The spring strut mounts strut mount assembly(mount with for the right and left No.8., No.9 and No. 10). side$ are identical parts. 3 Spring mount 4 Rubber support 1 5 Bellows 1 6 Coil spring 1 Availableas spare part only !in sets 7 Vibration damper 1 The vibration dampersfor the ~ightand left sides are identical parts. 8 Spacersleeve 9 Retainer spring 1 10 Rubber bellows 11 Spring strut mount 1 The ppring strut mounts for tlle right and left side$ are identicalparts. In the case of used mounts,the bearing shell can be regreased with Autol Top 2000. Manlfifacturer:Autol-Werke Paradiesstr. 14 97080 Wurzburg 40 Disassembling and assembling front spring strut -GT3 40 -12c Printed in Germany -39, 2000 9964012a