Assembly Push the spring strut and mount assembly, · -Put coil spring No.6, spring pla

911 Carrera (996) Front wheel suspension, drive shafts Assembly Push the spring strut and mount assembly, -Put coil spring No.6, spring plate No.3 with consisting of parts No.8, No.9, No. 10 and rubber ring No.4 and bellows No.5 onto No. 11, onto the pistonlrod. the vibration damper. Note ! Note The mountsfor the right an~i left sides are identical parts.The tighter winding of the coil spring must face In the case of used mounts, the bearing shelldown -toward the damper tube. can be regreased with Autol Top 2000.The coil spring is equipped with an approx. Manufacturer:50 mm-long protective sheath. Autol-WerkeThis protective sheath is not yet present on Paradiesstr. 14vehicles from the initial production run. 97080 Wurzburg ('"@J ~3 ~-4 2 40880001 Fit new fastening nut and tighten it on the pushrod thread, which has been greased with Optimoly HT (copper paste). Tighteningtorque 80 Nm (59 ftlb.), Whentightening the fastening nut, hold at the piston rod using a 7-mm Allen key. Important: Never use an impact bolter to 40850003 tighten the fastening nut. 40 Disassembling and assembling front spring strut -GT3 40 -12e Printed in Germany -39, 2000 9964012a