Replacing wheel bearing housings (wheel carriers) · 2. Required tie rods (toe control arms)

911 Carrera (996) Rear wheel suspension, drive shafts Replacing wheel bearing housings (wheel carriers) 2. Required tie rods (toe control arms) The use of wheel carriers with a long steering arm is only permissible in conjunctionwith tie rods version B -SP No. 996.331.045.10. It is only permissible to install these tie rods in pairs. * * 996.331.245.083 W . B A L- 996.331.245.0a'W A -Tie rods without spherical mount 292_99 SP No. 996.331.045.06/07 /08 Cast No. 996.331.245.06/07/08 B -Tie rods with the spherical mount (optimised tie rods with harder rubber mount). SP No. 996.331.045.10 Cast No. * 996.331.245.10 (current) or Cast No. * 996.331.245.08 3 (the 3 was stamped at the end of the cast number in order to distinguish it (arrow) and was additionally provided with a blue dot in this area). On tie rod version B, the metal bushing of the rubber mount projects slightly -by approx. 1 mm -at both sides (arrow). 42 52 19 Removing and installing wheel bearing housing (wheel carrier) 42 -29 Printed in Germany -33, 1999 9964223