Press drive shaft out of the wheel hub Installing right drive shaft! · toothing.

911 Carrera (996) Rear wheel suspension, drive shafts Press drive shaft out of the wheel hub Installing right drive shaft! toothing. -Install in reverse order. $rease the toothing of the drive shaft with O~timolyHT.Note Since the drive shaft can be moved only using Carry out a visual inspe9tion of all parts, great force, loosen the shaft inwardswith taps Replaceself~ockingnutsl. on a copper mandrel. Lift up the shaft near the Use correct tightening torques. inner joint (possible damage to the closure cap of the drive shaft may occur). Note For unfavourabletolerances, the drive shaft must be pressed out of the wheel-hubtoothing Wheninstallingthe spring s ut, make sure that using a universalwheel-hubextractor. the spring-strutfastening scr w (arrow) is Always check the boots for damage if continuing tightened only in vehicle posi ion. to use the drive shaft! Vehicle position means: Vehi Ie standing on the Replacethe boots if necessary. wheels, or the wheel suspen ion is being raised with a universallift. 42210004 180_97 8. Removethe drive shaft. To do this, take the drive shaft on the transmission out in rearward and downward direction. 42 21 19 Removing and installing drive shaft (manual transmission) 42 -33 Printed in Germany -39, 2000 9964231