Wheels, tires, suspension alignment 911 Carrera (996) · The wheel bolt consists of two parts that

Wheels, tires, suspension alignment 911 Carrera (996) 911 GT3 MOO2 ! street version) / Mounting wheel on vehicle 911 GT3 MOO3 Club Sport version) The wheel bolt consists of two parts that IS-inch wheels (summer and winter tyres) are permanently joined together. front 2.2 bar overpressure Other wheel bolts must not be used. rear 2.7 bar overpressure Mounting specification: see Page 44-19. Spare wheel/collapsible wheel Note No spare wheel/collapsible wheel available. There are 5 mm spacer washers ~identical Howeverthere is a tyre repair kit in the luggage parts) fitted to the front and rear ~xles on compartmentwhich can be used to repair the the 911 GT3. damaged tyre in the event of damage. The wheel bolts are 5 mm longer pecause of the spacer washers. For procedure in the event of damage (repair), The longer whee! bolts are marked with GT see Tyre failurejtyre sealant911 GT3 in or with a red colour (arrow) on ti1eface Repair Group 44 surface of the bolt head. The colour of the spherical cap is also red from now on. Overview of tyres and wheels The chart of tyres and wheels for summer and winter should be taken from Technical A Information (TI)Group 4. When replacing summer tyres, pay close attention to the tyre specification number. The specification characters NI, N2, N3 or NO distinguishthe summer tyres specially authorised by Porsche from other models of the same tyre type and size. A = Standard wheel bolt 577_98Notes on mounting tyres dimensionX approx. 45 mm Whenfitting tyres, the direction of rotation and B = GT3 wheel bolt the inner and outer sides should be noted. dimensionX approx. 50 mm marked with GT or red colou 44 -2 44 Wheels and tyres 996441 Printed in Germany -25, 1999