Wheels, tires, suspension alignment 911 Carrera (996) · A triggering of the air bag

Wheels, tires, suspension alignment 911 Carrera (996) Warning! A triggering of the air bag (malfunction in the airbag & system) caused by improper work on airbag components cannot be ruled out! In the case of such a malfunction, an unsuitable steering wheel holder could cause injury or damage! > Use only steering wheel holders which do not project into the area of the airbag unit! 106_96 > Observe safety regulationswhen working with airbag vehicles(see in Repair Group 69)! A Clamp steering wheel in centre position with 2 steering wheel holder (Figure 106_96), Use only steering wheel holders which do not project into the area of the airbag unit! If necessary, shorten the guide rod (A) at top (arrow). Then adjust toe at hexagon No.2 of the track -:HI rod(s) after loosening the lock nut(s) No.1 (Figure 133_1_96), 133_1_96 In vehicles with PSM, the steering wheel holder must subsequently be calibrated! In order to tighten the tie rod lock nut(s) -to the prescribed tightening torque -use special tool 9625 in conjunction with a torque wrench (Figure 7_97). ~ \\, The prescribed lock nut tightening torque of 50 Nm (37 ftlb.) corresponds to a setting on the torque wrench of approx. 35 Nm (26 ftlb.). \ Toe-difference angle Special tool 9625 7_97 The toe-differenceangle is not adjustable. 44 -16 44 Suspension alignment, complete 996449 Printed in Gennany -34, 1999 -J!~~