6911 Targa Body-Equipment, Exterior · Section 1 Windshield Frame – Glass Roof Panel Center

6911 Targa Body-Equipment, Exterior Section 1 Windshield Frame – Glass Roof Panel Center 6_02_02 The roof module (1) is set into the windshield frame (3) from below with the centering pin (2). Tape (4) is installed between the roof module and the windshield frame to provide a peripheral seal. The windshield filler panel (5) covers the roof module join and forms the visual transition between the windshield and the glass roof panel (6). The filler panel is attached by three screws (7), with the screw locations being concealed by caps. The weatherstrip runs between the filler panel and the glass roof panel and is installed at the filler panel. The glass roof panel is bolted to the frame (8) using M6 tensioning bolts (9) and spacers (10). The bolt locations are concealed by caps (11). The upper (12) and lower (13) glass roof panel weatherstrip is installed on the frame of the roof panel. The front roof (14) trim panel covers the wind deflector (15) and the seat for the wind deflector (16). 2002 Service Training 6-13