2nd possibility: · Releaseswitch by turning it 900 and pull it

2nd possibility: Releaseswitch by turning it 900 and pull it out of the installation opening. Pull operating plunger out of the switch as far as it will go. Reinstallthe switch. When installing the switch for the first time, it is essential to press it vertically against the bearing surface. It will otherwise not be possi- ble to lock the switch (900turn), even if great force is exerted. Note A play-freefit of the switch is no longer ensured after it has been installed and removed several times. The switch must be replaced by a new switch as soon as it perceptibly "wobbles"in its receiver. Adjusting switch if pedal travel is too large Press pedal and press plunger into the switch by one notch (audibleclick). The pedal travel to the switching point then de- creases by approx. 3... 4 mm. Then check setting again. 46 -14 46 Checking brake light switch setting