46 53 04 Measuring the rear brake disc lateral runout · Includes: Measuring the brake disc Note

911 Carrera (996) Brakes -Brake mechanics 46 53 04 Measuring the rear brake disc lateral runout Includes: Measuring the brake disc Note thickness tolerance If necessary, provide the dial gauge holder with 1. Preconditionfor measurement:No tilt play the Ate conversion set, order No. 03.9314 - at the wheel. 5510.3/01 (longer clamping wing screw and, possibly, also a bracket for the dial gauge). 2. Fit the adapter plate (special tool 9510/1) to the wheel hub. Tightening torque of the 4. Secure the dial gauge with some preload. ositi- wheel bolts (fastening screws) 130 Nm on the measuring tip outside the perforation (96 ftlb.). on the largest diameter of the braking surface. 1035-46- 583_97 5. Turn the brake disc and, when doing so, 3. Insert dial gauge holder, read off the lateral runout at the dial gauge. e.g. Ate order No. 03.9314 -5500.3/01, The permissible lateral runout of the installed into the brake caliper, align it and secure it brake disc is max. 0.06 mm. by turning the clamping wing screw. If the brake disc cannot be turned freely, Note set the brake pads back a little. Do not damage the expanding spring when Lateral runout of the removed fitting the dial gauge holder. brake disc: 0.03 mm.max. Wheel hub lateral runout: 0.03 mm. 46 -27max.