Plug-in couplings for steering hydraulic system · -Pressure and returnlineshavedifferentdimensions.

911 Carrera (996) Steering Plug-in couplings for steering hydraulic system Note -Pressure and returnlineshavedifferentdimensions. Pressureline = nominaldiameter6, returnline = nominaldiameter10. The plug-in coupling is opened by unscrewing. It is joined by plugging together. Join the plug~nconnection only in a straight line. Never use excessforce. After separating the plug and socket piece, carefully protect them against dirt and scratches with caps. Correct engagementmust be checked with a gentle pull. Use special tool 9623 for this purpose. No. Procedure Instructions Openplug-incoupling. Turn at threaded part A to open the plug-incoupling. Whendoing so, counter at plug~ncoupling B. Open corresponding retainers on Carefullydisengageclip andfold down. the body. 2 RemoveholderC. Tilt holder C on one side and simultaneouslypull to disengage. 3 Pullthreadedpart A from the Detach threaded part A by pulling it off the plug. plug. 4 Screw together plug~ncoupling. Close holder C (arrow / dovetail system). Screw threaded part A with fitted holder C into plug~ncoupling Band tighten. Counterwhen tightening. Replaceholder C and threaded part A if necessaryin order to ensure that the plug~nconnectionfunctions properly (holdingfunction and tightness). 48 -15