48 07 19 Removing and installing lock barrel · Removal Installation

911 Carrera (996) Steering 48 07 19 Removing and installing lock barrel Removal Installation 1. Disconnectbattery ground cable. 1. Ignition lock with the pawl depressed must be in position 1 (ignition on). 2. Pull cover (collar) off the steering lock. 2. Press on the pawl of the lock barrel (locking 3. Insert ignition key and turn to position 1 pawl). Insert the ignition key and turn the key (ignition on). as far as it will go to position 1 (ignition on). Insert a steel wire (C) with a diameter of In this position, insert the steel wire (C) that approx. 1.3 mm (max. 1.5 mm .0) into the was used for removal. bore next to the ignition key (arrow) as far as it will go. 3. Plug connector onto the ignition coil (8). Pull the lock barrel with induction coil out of Position the induction coil (8) and push the the steering lock housing. lock barrel all the way into the housing. Turn the ignition key correspondingly, if necessary, Note until the lock barrel has been pushed in fully. Inserting the steel wire (C) unlocks the lock Pull out the steel wire (C) in this position so barrel in the steering lock housing. that lock engages. 1"'" 2 B / r c r-"\ \~ I ,- 54O_97 527_97 4. Carefullyunlock and separate the plug connection on the lock barrel (at the induction coil for the immobilizer). I'J/