996 Carrera Group 4 Running Gear / PAGE 209
Steering 911 Carrera (996) · 8. Install the instrumentcluster. Note
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Steering 911 Carrera (996)
8. Install the instrumentcluster. Note
Connectthe electrical plug connection on the The transponder is located in the key head.
instrumentcluster. Push in the instrument The new transponder is taught with the
cluster at the left and right and clip into place; Porsche System Tester 2.
fasten it with the Torx screws 5.0 x 22. Press A new transponder can be taught to the vehicle
in the hazard warning light switch and fit the in the system "Alarm system", menu "Teaching
plug on the left side. On the "telephonewith
functions"/submenu "Transponder key".
handsfree unit" variant, plug in the microphone Access to IPAS is necessary in order to teach
plug instead and engage the microphonein the transponder.
position.
The transponder does not have to be taught
if:
the previous key head A (handheld
transmitter) is fitted on the new key C. ~
/" (Disassembling and assembling handheld
transmitter -Service No. 90 73 37)
I <r)
a new lock barrel with defined locking is
installed (the entire previous key can thus
be used),
the previous lock barrel with key is used.
Removingand installing lock barrel, refer to 97-092
Service No. 48 07 19.
9. Installside nozzleand main light switch,
refer to Servo No. 94 05 19 (Page 94 -7/
94 -8).
10. Install steering wheel and airbag unit, refer
to ServoNo. 48 10 19 (Page 48 -5).
Observethe safety regulations for handling
airbag units.
11. Connectbatterygroundcable.
Performfunctiontest.
12. If a new transponder (new lock barrel with
new key) is used, the new key must be
taught. Refer to Service No. 90 01 in the
TechnicalManual(in diagnosis section).
634_97
~-
This is a source reference. Confirm exact model applicability in the original material.
