Steering 911 Carrera (996) · Removing hydraulic pump

Steering 911 Carrera (996) Removing hydraulic pump No. Procedure Instructions 1 Removingair cleaner assembly Undo the hose clamp on the throttle body. Remove connector from hot film mass air flow meter. Unclip electrical lead on throttle body. 2 Removingair cleaner assembly Unclip oil filler neck. Undo hexagon-headbolt M6 x 20 and remove entire air cleaner assembly. 3 Loosening belt pulley Undo three hexagon-head bolts (M8 x 12) by approx. one half turn. Note The belt pulley can also be loosened with a restraining strap after removal of the drive belt. 4 Removingdrive belt Mark belt travel direction with a coloured pen. Slacken belt by turning the tensioning pulley(wrench size 24 mm) clockwise, hold still and simultaneouslytake the belt off the drive pulleys. 5 Looseningthree-phasegenerator Undo right-handfastening screw (in direction of travel) and unscrew. Undo left-handfastening screw (with deflection roller) by three turns. A gentle tap on the fastening screw loosens the threaded bushingin the generator arm (use aluminium mandrel), 6 Looseningair-conditioning Undo front compressor fastening screws (2 ea.) and compressor disconnectelectrical plug connection.