No. Procedure Instructions · 12 Detaching steering return line The line can also be detached

No. Procedure Instructions 12 Detaching steering return line The line can also be detached using a commercially from the supply tank with availabletool. The removal tool from Messrs. Snap-On,for tool example,is recommendable.Insert tool between line and the red unlockingring and unlock. Pull line to the rear and simultaneouslypress the tool againstthe red ring. Carefully protect the line against dirt and scratches with a cap. 13 Detaching hydraulic pump and Undo steering supply line (wrench size 17); simultaneously steering supply line counter at the body (wrench size 27). Undo three hexagon-headbolts (M8 x 12) and remove hydraulicpump to the rear. Note If coolant hoses come into contact with Pentosin,clean them thoroughlywithout delay. Removingbracketwithtensioning Undo flange for oil filler neck at the left rear bracket element fastening screw. Immediatelyseal bore on the crankcase. Undo four hexagon-headbolts and remove bracket with tensioning element.