Steering 911 Carrera (996) · Installing hydraulic pump

Steering 911 Carrera (996) Installing hydraulic pump No. Procedure Instructions Installing hydraulic pump Fasten bracket with tensioning element on the crankcase. Tightening torque 23 Nm (17 ftlb.). Insert hydraulic pump from the rear and fasten. Tightening torque 23 Nm (17 ftlb.), 2 Fitting steering return line Insert line into the plug~ncoupling in a straight line. Then pull slightlyto ensure that the connection is properly locked. 3 Fitting supply tank for power Turn bayonet lock to its initial position. steering system 4 Fitting supply tank for power Remove plug. Position tank (observe markings). Lock steering system bayonet lock. 5 Fitting drive belt Fit belt pulley of the hydraulicpump and screw in hexagon-headbolts. Fit drive belt. Assembly instructionson Page 13-1 6 Fastening belt pulleyfor hydraulic Tighten three hexagon-head bolts. Tightening torque 23 Nm (17 ftlb.). pump Note The belt pulleycan also be held and tightened with a restraining strap before the drive belt is fitted. Fasten air-conditioning compressor. Tightening torque 28 Nm (21 ftlb.). Fasten generator. Fit throttle body and air cleaner assembly.