3. Insert the drive shaft into the toothing of the 4. Check wheel alignmentvplues at the front axle · wheel hub. Insert w

911 Carrera 4 (996) Front wheel suspension, drive shafts 3. Insert the drive shaft into the toothing of the 4. Check wheel alignmentvplues at the front axle wheel hub. Insert wheel carrier with spring and adjust if necessary. I strut into the vehicle. The installation side "RE"(right) or "LI" (left) is Note stamped on the spring strut mount. If assemblywork was perfo med or parts ! Note the installed position of the spring strut replaced that affect the veh cle height, a mount. The arrow markings must point in the complete wheel alignmenti necessary. direction of travel. 343_'_99 Note If the vibration damper was replaced, check the following after the spring strut is installed: The stabilizer mount must not be braced at complete right and left stops (ball heads still movable)! Loosen spring seats if necessary and centre accordingly (see Disassemblingand assembling front spring strut -Carrera 4). 40 85 19 Removing and installing front spring strut -Carrera 4 40 -107 Printed in Germany -33, 1999 C4_40105