45 60 19 Removing and installing steering angle sensor · Note Removal

911 Carrera 4 (996) j~nti-Lock Brake System (ABS) 45 60 19 Removing and installing steering angle sensor Note Removal A steering angle sensor (C) is attached 1. Removedriver's seat. to the steering column/steering shaft in the 911 Carrera (996) with PSM 2. Disconnectbattery ground cable. (Porsche Stability Management). 3. Turn front wheels to straight-aheadposition. The cover (0) remains fitted during removal and Affix the front wheels and the steering wheel installation of the steering angle sensor (C). in this position. 4. Undo hexagon-headbolt on universaljoint A. Detach universaljoint A from the upper steering shaft and push into the lower steering shaft (direction arrow). Disengagecable guide B in the direction of travel. c B A = Universaljoint of steering shaft 301_99 C = Steering angle sensor D = Cover Important note on steering wheel position for removal and installation D Turn front wheels to straight-aheadposition. A = Universaljoint of steering shaft 302_99Lock the steering wheel and the front wheels B = Cable guide in this position and ensure that this position is C = Steering angle sensor maintainedfor reinstallation. D = Cover The universaljoint A can now be detached from the upper steering shaft and and refitted in the same position during installation. If this is not done, the airbag contact unit (spiral spring) can be damaged. Also, the steering wheel can be crooked with the front wheels in straight-aheadposition after installation of the steering angle sensor! 45 60 19 Removing and installin!~ steering angle sensor 45 -109 Printed in Germany -28, 1999 C4_451 09