45 62 19 Removing and in!italling control module -PSM 5.3 · Removal Install

911 Carrera 4 (996) Anti-Lock Brake System (ABS) 45 62 19 Removing and in!italling control module -PSM 5.3 Removal Installation 1. Removeignition key, 1. Engage control module connector in the guide of the control module. Then push the 2. Open luggage compartment lid and remove connector onto the connector strip and lock. luggage compartment floor lid. 2. Fastenthe controlmodule. 3. Pull control module cover up and off. 3. Fitthe covers. 4. Unscrewfastening nuts (A). 4. Read out the fault memory with the Porsche System Tester 2 and erase the fault memory if necessary. Note If a new control module is installed,the steering angle sensor must be calibrated (see ServoNo. 45 60). 300_99 5. Removecontrol module from the holder (0), Open locking clip and pull the control module connector off, 456219 Removing and installing control module -PSM 5.3 45-111 Printed in Germany -28,1999 C4_451 09