47 01 07 Bleeding brakes (vehicle with PSM) · PSM (Porsche Stability Management) 1st step:

47 01 07 Bleeding brakes (vehicle with PSM) PSM (Porsche Stability Management) 1st step: is standard in 911 the Carrera 4 (996). Bleed brakes as usual Fill reservoir to its top edge with new brake Important notes fluid. Connect a bleeding device to Use only new DOT 4 brake fluid. the brake fluid reservoir. Observe brake-fluid quality. Switch on the bleeding device. Bleeding pressure approximately2.0 bar. The brake-fluid change interval using Super DOT 4 brake fluid is two years. This brake fluid is available under the following part numbers: Containervolume 1 litre = 000.043.203.66 Containervolume 30 litres = 000.043.203.67. Procedure for bleeding 1st step: Bleed brakes as usual. I 2nd step: Then bleed at front on right with 682_3.-96 running booster pump. Continuebleeding at the brake calipers Note in the sequence:Rear right / rear left / This procedure is generally required for bleeding. front left / front right. Open each bleeder valve until clearJ bubble-freebrake fluid emerges. It must be noted that bleeding takes place at both bleeder valves on each caliper. Bleed the outer bleeder valvefirst. Use a collecting bottle to make an accurate check on the escaping brake fluid for cleanliness,lack of air bubbles and to determinethe brake fluid used. 47 01 07 Bleeding brakes (vehicle with PSM) 47 -101 Printed in Germany -15, 1998 C4_47101 ~