fullymatted.
Back to search
996 Carrera Group 4 Running Gear / PAGE 260

47 08 55 Changing brake fluid (vehicle with PSM) · Important notes Continuebleeding at th

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 260
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera 4 (996) Bra~,es -Hydraulics, regulator, booster 47 08 55 Changing brake fluid (vehicle with PSM) Important notes Continuebleeding at the brake calipers Use only new DOT 4 brake fluid. (no special sequence). Open each bleeder valve until clearI Observe the change interval and bubble-freebrake fluid emerges or the brake fluid quality. the appropriate change quantity per Total brake fluid change quantity brake caliper has been reached approx. 1 litre. (approximately250 cm3). Make sure The brake-fluid change interval is 2 years that brake fluid is drained at both in conjunction with the Super DOT 4 brake bleeder valves on each brake caliper. fluid. Use a collecting bottle to accuratelycheck This brake fluid is available under the following the escaping brake fluid for cleanliness, part numbers: Container volume 1 litre = 000.043.203.66 lack of air bubbles and to determine Container volume 30 litres = 000.043.203.67 the brake fluid used. Some brake fluid is also drained off at Procedure for changing brake fluid the bleeder valve of the clutch slave cylinder (approx. 50 cm3), -Fill reservoir to its top edge with new brake fluid. Connect a bleeding device to Switch off and disconnectthe bleeding the brake fluid reservoir. device. Correct the brake fluid level Switch on the bleeding device. Bleeding if necessary. pressure approximately 2.0 bar. / / / / /'/ / / / / / ! 189_~96 682_~96 47 08 55 Changing brake fluid (vehicle with PSM) 47 -105 Printed in Germany. 15, 1998 C4_47101 ~,/I

This is a source reference. Confirm exact model applicability in the original material.