996 Carrera Group 0 Part 1 Diagnosis / PAGE 58
Tiptronic diagnosis 911 Carrera (996) · Fault, DTC Possible causes, elimination, notes
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Tiptronic diagnosis 911 Carrera (996)
Fault, DTC Possible causes, elimination, notes
Test point 22
Supply voltage to solenoid Faulteffect:
valve/pressure regulator Reduceddriving program.
Open circuit/short to
ground Note
DTC 11
The coils of the solenoid valves (SV)are supplied directly with positive
potential on one side and with ground on the other side via an output
stage in the control module.
1. Check supply leads of the solenoid valves(pins 52 and 53) for open
circuit and short to ground.
2. If the test described in 1 is not OK, check wiring from control module
connector pin 52 (or 53) to the 16-poletransmissionconnector pin
12 (or 16) for open circuit and short to ground.
3. Check the transmissionwiring harness at transmission socket pins
16 and 12 for open circuit and short to ground.
Test point 23
Terminal 3D, open circuit Faulteffect:
Open circuiVshort Faultis onlyenteredin the fault memory.
to ground
DTC 12 Note
The Tiptronic control module is continuouslysupplied with battery
voltage via pin 26 (+ 30).
1. Test voltage at control module connector pin 26.
If no battery voltage is displayed, check fuses B1 and F6
and the wire from the battery to the control module.
37 -D 38 37 01 DiagnosisjTroubleshooting, Tiptronic
99637D21 Printed in Germany -8, 1998
This is a source reference. Confirm exact model applicability in the original material.
