996 Carrera Group 0 Part 1 Diagnosis / PAGE 71
ABS/fC 5.3 (4-channel system) system description · Note} Switching off driving stabilit
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
ABS/fC 5.3 (4-channel system) system description
Note} Switching off driving stability control *
Traction Control (TC) represents an extension of
the ABS system and is a combination of anti-slip Press the "TC OFF"logo of the rocker switch.
control (ASR)and Automatic Brake Differential Driving stability control cannot be switched
(ABD). off during a TC control process (information
light on).
TC prevents spinning of the drive wheels when
One-sided wheel spin on the drive axle ismoving off and accelerating. Driving stability
further prevented by brake control up to aand traction are improved over the entire
speed of 100 km/h.speed range.
Driving stability is not monitored, since the
Traction Control (TC)is ready for operation drive wheels can spin at the same rpm (slip).
wheneverthe engine is started.
With driving stability control switched off, the
The TC information light in the instrument panel TC MIL in the instrumentpanel and the
is lit during a control process and warns that indicator light in the rocker switch are lit.
the driving style must be matched to road
It can be advantageousto switch off drivingconditions.
stability control:
-on a loose surface and in deep snowFunction -when "rocking"the vehicle free
-when using snow chains.Driving-stability control:
If Traction Control (TC)detects that a certain
speed difference between the wheels has Switching driving stability control back on *
been exceeded (wheel spin), engine power
is automaticallyreduced.
Press the indicator light in the rocker switch.
Brake control:
Driving stability control cannot be switched onIn addition to reducing the engine power (driving-
again during a TC control process (informationstability control), the TC (via the ABO)brakes the
light on).drive wheel that is spinning.
Since this control requires the drive wheelsto * Press the switch for at least 0.1 second.
be individuallycontrolled, the ABSfTC system
Then a further 0.3 second will pass until
is a 4-channel system.
the routine is complete. Onlythen is driving
stability control switched off or on.
45 -D 8
This is a source reference. Confirm exact model applicability in the original material.
